IEI Integration TANK-700-QM67 v1.12 - Manual (Page 73)

TANK-700 Embedded System
Page 61
Î Device Mode [Normal]
Use the Device Mode option to enable or disable the serial port.
Î
Normal D EFAULT
Sets the serial port mode to normal.
Î
RS422/485 Enables serial port RS-422/485 support.
4.3.6.1.2 Serial Port 8 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled Disable the serial port
Î
Enabled D EFAULT
Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT
The serial port IO port address and interrupt address
are automatically detected.
Î
IO=2F8h;
IRQ=3
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3
Î
IO=3F8h;
IRQ=3, 4, 5,
6, 7, 9, 10,
11, 12
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ3, 4, 5, 6, 7, 9, 10, 11, 12
Î
IO=2F8h;
IRQ=3, 4, 5,
6, 7, 9, 10,
11, 12
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3, 4, 5, 6, 7, 9, 10, 11, 12