IEI Integration TANK-101B-D525_N455 v1.00 - Manual (Page 39)

TANK-101B/BW Em b e d d e d S ys te m
P a g e 29
The VGA connector connects to a monitor that accepts VGA video input.
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Figure 1-2.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3: Insert the VGA connector . Once the connectors are properly aligned with,
insert the male connector from the VGA screen into the female connector on the
TANK-101B/BW. See Figure 3-17.
Figure 3-17: VGA Connector
S te p 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
Figure 3-18: VGA Connector