IEI Integration PM-945GSE - Manual (Page 87)

PM-945GSE-N270 User Manual
Page 87

Disabled No base address is assigned to Serial Port 2

2F8 D EFAULT Serial Port 2 I/O port address is 3F8 and the interrupt
address is IRQ3

3E8 Serial Port 2 I/O port address is 3E8 and the interrupt
address is IRQ4

2E8 Serial Port 2 I/O port address is 2E8 and the interrupt
address is IRQ3
 Serial Port2 IRQ [3]
Use the Serial Port3 IRQ option to select the interrupt address for serial port 3.

3 Serial port 3 IRQ address is 4
 Serial Port3 Address [3E8]
Use the Serial Port3 Address option to select the base addresses for serial port 3.

Disabled No base address is assigned to serial port 3

3F8 Serial port 3 I/O port address is 3F8

2F8 Serial port 3 I/O port address is 2F8

3E8 D EFAULT Serial port 3 I/O port address is 3E8

2E8 Serial port 3 I/O port address is 2E8
 Select RS232 or RS485/RS422 [RS/232]
Use the RS232/RS485/RS422 Select option to select the Serial Port 2 signaling mode.

RS232 D EFAULT Serial Port 2 signaling mode is RS-232

RS422/485 Serial Port 2 signaling mode is RS-422/485
 Serial Port3 IRQ [4]
Use the Serial Port3 IRQ option to select the interrupt address for serial port 3.