IEI Integration PM-945GSE - Manual (Page 55)

PM-945GSE-N270 User Manual
Page 55
o When working with the PM-945GSE-N270, make sure that it is
disconnected from all power supplies and that no electricity is being fed
into the system.
Before and during the installation of the PM-945GSE-N270 DO NOT:
 Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
 Use the product before verifying all the cables and power connectors are
properly connected.
 Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.2.2 Installation Checklist
The following checklist is provided to ensure the PM-945GSE-N270 is properly installed.
 All the items in the packing list are present
 A compatible memory module is properly inserted into the slot
 The CF Type I or CF Type II card is properly installed into the CF socket
 The jumpers have been properly configured
 The PM-945GSE-N270 is inserted into a chassis with adequate ventilation
 The correct power supply is being used
 The following devices are properly connected
o SATA drive
o RS-232 devices
o RS-422/485 devices
o Keyboard and mouse
o LAN
o LCD backlight
o Power
o LVDS LCD screen
o VGA display
o USB port