beautypg.com

4 four serial port connector, Figure 4-11: sata power drive connection – IEI Integration PM-945GSE User Manual

Page 68

background image

PM-945GSE-N270 User Manual

Page 68

Figure 4-11: SATA Power Drive Connection

4.7.4 Four Serial Port Connector

The 40-pin serial port connector connects the board connector to four DB-9 connectors.

To install, please follow the steps below.

Step 1:

Locate the COM connector. The locations of the COM port connectors are

shown in Chapter 4.

Step 2:

Insert the cable connector. Align the cable connector with the onboard

connector. Make sure pin 1 on the board and connector line up Figure 4-12.

See also other documents in the category IEI Integration Hardware: