Figure 4-8: lvds connector – IEI Integration PM-945GSE User Manual

Page 65

PM-945GSE-N270 User Manual

Page 65

Step 2:

Insert the cable connector. Insert the connector from the LVDS PCB driving

board to the LVDS connector as shown in Figure 4-8. When connecting the

connectors, make sure the pins are properly aligned.

WARNING:

The diagram below is merely for illustration. The configuration and

connection of the cables from the TFT LCD screen being installed may

be different. Please refer to the installation manual that came with the

TFT LCD screen.

Figure 4-8: LVDS Connector

Step 3:

Locate the backlight inverter connector. The location of the backlight inverter

connector is shown in Chapter 3.

Step 4:

Connect backlight connector. Connect the backlight connector to the driver

TFT LCD PCB as shown in Figure 4-9. When inserting the cable connector,

make sure the pins are properly aligned.

Step 0: