IEI Integration PM-945GSE - Manual (Page 31)

PM-945GSE-N270 User Manual
Page 31
Figure 3-3: 12V / 5V Power Connector Location
PIN NO. DESCRIPTION
1 VCC12
2 GND
3 VCC5
Table 3-2: 12V / 5V Power Connector Pinouts
3.2.2 ATX Power Supply Enable Connector
CN Label: ATXCTL1
CN Type: 3-pin wafer (1x3)
CN Location: See Figure 3-4
CN Pinouts: See Table 3-3
The connector is for enabling an ATX power supply. When connected to the power supply,
the power can be turned on and off with the front panel switch. Use the optional ATX
power cable. Pins 2-3 are shorted by default for AT power.