IEI Integration IMBA-XQ354 v1.10 - Manual (Page 89)

IMBA-XQ354 Motherboard
Page 69
Before and during the installation of the IMBA-XQ354 DO NOT:
 Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
 Use the product before verifying all the cables and power connectors are
properly connected.
 Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the IMBA-XQ354 is properly installed.
 All the items in the packing list are present
 A compatible memory module is properly inserted into the slot
 The jumpers have been properly configured
 The IMBA-XQ354 is inserted into a chassis with adequate ventilation
 The correct power supply is being used
 The following devices are properly connected
o RS-232 cables
o USB cables
o FDD cables
o Power cables
 The following external peripheral devices are properly connected to the
chassis:
o VGA screen
o Keyboard
o Mouse
o RS-232 serial communications device