IEI Integration IMBA-XQ354 v1.10 - Manual (Page 126)

IMBA-XQ354 Motherboard
Page 106

IDE D EFAULT The drive connected to the nth SATA port is configured as an
IDE drive

RAID The SATA drive connected to the nth SATA drive port is
specified as a SATA drive that is part of a RAID array

AHCI The SATA drive connected to the nth SATA drive port is
specified as a normal SATA drive.
 IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
 Primary IDE Master
 Primary IDE Slave
 Secondary IDE Master
 Secondary IDE Slave
 Third IDE Master
 Fourth IDE Master
The IDE Configuration menu (
9
BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 97
9
6.3.2.1 appear.