IEI Integration IMBA-XQ354 v1.10 - Manual (Page 115)

IMBA-XQ354 Motherboard
Page 95
Figure 5-22: USB Connector
5.6.6 VGA Monitor
The IMBA-XQ354 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the IMBA-XQ354, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
IMBA-XQ354. See
9
Figure 5-23.