IEI Integration IMBA-XQ354 v1.10 - Manual (Page 110)

IMBA-XQ354 Motherboard
Page 90
5.6 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 Keyboard and mouse connectors
 Serial port devices
 VGA screens
 Parallel port devices
 Ethernet connection
 USB devices
 Audio jacks
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding IMBA-XQ354 external peripheral interface connector making
sure the pins are properly aligned.
5.6.1 Keyboard and Mouse
The IMBA-XQ354 has a dual PS/2 connector on the external peripheral interface panel.
The dual PS/2 connector is used to connect to a keyboard and mouse to the system.
Follow the steps below to connect a keyboard and mouse to the IMBA-XQ354.
Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is
shown in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the appropriate PS/2 connector on the external peripheral
interface connector. See
9
Figure 5-18. Step 0: