IEI Integration IMBA-XQ354 v1.10 - Manual (Page 112)

IMBA-XQ354 Motherboard
Page 92
Figure 5-19: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
5.6.3 Parallel Device Connection
The IMBA-XQ354 has a single female DB-25 connector on the external peripheral
interface panel for parallel devices. Follow the steps below to connect a parallel device to
the IMBA-XQ354.
Step 1: Locate the DB-25 connector. The location of the DB-25 connector is shown in
Chapter 3.
Step 2: Insert the DB-25 connector. Insert the DB-25 connector of a parallel device
into the DB-25 connector on the external peripheral interface. See
9
Figure 5-20.