1 introduction, 1 starting setup, 2 using setup – IEI Integration ICE-945GSE v1.01 User Manual

Page 56: Ntroduction

ICE-945GSE COM Express Type 2 Module

Page 44

6.1 Introduction

NOTE:

The BIOS items shown below are from a ICE-945GSE installed on the

ICE-DB-9S-R10 reference carrier board. The ICE-DB-9S-R10

reference carrier board is available from iEi, contact

or go to

A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup

program allows users to modify the basic system configuration. This chapter describes

how to access the BIOS setup program and the configuration options that may be

changed.

6.1.1 Starting Setup

The AMI BIOS is activated when the computer is turned on. The setup program can be

activated in one of two ways.

1. Press

the

ELETE

key as soon as the system is turned on or

2. Press

the

ELETE

key when the “Press Del to enter SETUP”

message appears on the screen.

If the message disappears before the D

ELETE

key is pressed, restart the computer and try

again.

6.1.2 Using Setup

Use the arrow keys to highlight items, press E

NTER

to select, use the PageUp and

PageDown keys to change entries, press F1 for help and press E

to quit. Navigation

keys are shown in.

Key

Function

Up arrow

Move to previous item

Down arrow

Move to next item