IEI Integration ICE-945GSE v1.01 - Manual (Page 49)

ICE-945GSE COM Express Type 2 Module
Page 37
5.2 Unpacking
NOTE:
If any of the items listed below are missing when the ICE-945GSE is
unpacked, do not proceed with the installation and contact the
ICE-945GSE reseller or vendor.
5.2.1 Unpacking Precautions
Before installing the ICE-945GSE, unpack the CPU module. Some components on
ICE-945GSE are very sensitive to static electricity and can be damaged by a sudden rush
of power. To protect it from being damaged, follow these precautions:
ƒ The user should ground them self to remove any static charge before
touching the ICE-945GSE. To do so wear a grounded wrist strap at all times
or frequently touch any conducting materials that is connected to the ground.
ƒ Handle the ICE-945GSE by its edges. Do not touch the IC chips, leads or
circuitry if not necessary.
Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from
static discharge.
5.2.2 Checklist
When unpacking the ICE-945GSE, please make sure that the package contains the
following items.
ƒ 1 x ICE-945GSE embedded module
ƒ 1 x Heatspreader
ƒ 1 x Utility CD
ƒ 1 x QIG
If one or more of these items are missing, please contact the reseller or vendor the
ICE-945GSE was purchased from and do not proceed any further with the installation.