IEI Integration ICE-945GSE v1.01 - Manual (Page 53)

ICE-945GSE COM Express Type 2 Module
Page 41
5.4.2 BIOS Selection
Jumper Label: SW2
Jumper Type: 4-in-1 switch
Jumper Settings: See Table 5-3
Jumper Location: See Figure 5–2
This jumper selects which BIOS to use. There is a BIOS included on the ICE-945GSE, but
a BIOS connected to the LPC or PCI bus can be used instead. The clear CMOS jumper
settings are shown in Table 5-3.
1 2 3 4 Description
OFF ON OFF OFF SPI
ON OFF OFF OFF LPC
OFF OFF OFF OFF PCI
Table 5-3: BIOS Selection
5.5 Mounting the ICE-945GSE
WARNING!
Never run the embedded module without an appropriate heat sink.
WARNING!
Please note that the installation instructions described in this manual
should be carefully followed in order to avoid damage to the CPU
module components and injury to the user.