beautypg.com

2 peripheral interface connectors, 2 etx interface connectors, Nterface – IEI Integration ICE-945GSE v1.01 User Manual

Page 36: Onnectors, Figure 4-2: connector and jumper locations, Table 4-1: ice-945gse interface connectors

background image

ICE-945GSE COM Express Type 2 Module

Page 24

Figure 4-2: Connector and Jumper Locations

4.1.2 Peripheral Interface Connectors

Table 4-1 shows a list of the interface connectors on the ICE-945GSE Detailed

descriptions of these connectors can be found in Section 4.2.

Connector

Type

Label

COM Express connector CD

COM Express connector

J1

COM Express connector AB

COM Express connector

J2

SO-DIMM socket

SO-DIMM socket

DIMM1

SPI programming connector

6-pin connector

SPI1

Table 4-1: ICE-945GSE Interface Connectors

4.2 ETX Interface Connectors

The ICE-945GSE embedded module has standard four standard ETX interface

connectors on the reverse side of the board. The location of the pins and the pinout

descriptions are given below.

See also other documents in the category IEI Integration Hardware: