4 intel® 945gse northbridge chip, 1 ddr2 controller, 2 graphics – IEI Integration ICE-945GSE v1.01 User Manual
Page 24: Ntel, 945gse, Orthbridge
ICE-945GSE COM Express Type 2 Module
Page 12
Thermal management support via Intel® Thermal Monitor 1 and Intel Thermal
Monitor 2
FSB Lane Reversal for flexible routing
Supports
C0/C1(e)/C2(e)/C4(e)
L2 Dynamic Cache Sizing
Advanced power management features including Enhanced Intel
SpeedStep® Technology
Execute Disable Bit support for enhanced security
2.4 Intel® 945GSE Northbridge Chip
The Intel® 945GSE is connected to the 1.6 GHz Intel® ATOM™ N270 CPU through the
FSB and to the Intel® ICH7M Southbridge through the DMI. The Intel® 945GSE is
connected to the SO-DIMM and supports DDR2 memory. The Intel® 945GSE also
provides graphics capabilities (described elsewhere). The Intel® 945GSE and its
connections are shown in Figure 2-4.
2.4.1 DDR2 Controller
There is one 200-pin DDR2 SO-DIMM socket on the ICE-945GSE. The socket supports
DDR2 SO-DIMM with the following specifications:
Maximum Memory supported 2 GB
Support for DDR2 at 400 MHz and 533 MHz
No support for Dual-Channel Interleaved mode of operation
Enhanced Addressing support (Swap only)
The SO-DIMM socket is shown in Figure 2-4.
2.4.2 Graphics
The Intel® 945GSE Northbridge chipset has an Intel® Gen. 3.5 integrated graphics
engine that supports the following display devices through connectors on the carrier
board:
Analog
CRT
LVDS
TV-Out