IEI Integration ICE-945GSE v1.01 - Manual (Page 48)

ICE-945GSE COM Express Type 2 Module
Page 36
5.1 Installation Considerations
NOTE:
The following installation notices and installation considerations should
be read and understood before the CPU module is installed. All
installation notices pertaining to the installation of the CPU module
should be strictly adhered to. Failing to adhere to these precautions
may lead to severe damage of the CPU module and injury to the
person installing the CPU module.
Before and during the installation of the ICE-945GSE, please do the following:
ƒ Read the user manual
o The user manual provides a complete description of the ICE-945GSE,
installation instructions and configuration options.
ƒ Wear an electrostatic discharge cuff (ESD)
o Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.
ƒ Place the CPU module on an antistatic pad
o When installing or configuring the CPU module, place it on an antistatic
pad. This helps to prevent potential ESD damage.
ƒ Turn off all power to the ICE-945GSE
o When working with the CPU module, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the ICE-945GSE DO NOT:
ƒ DO NOT remove any of the stickers on the PCB board. These stickers are
required for warranty validation.
ƒ DO NOT use the product before verifying all the cables and power connectors
are properly connected.
ƒ DO NOT allow screws to come in contact with the PCB circuit, connector pins,
or its components.