IEI Integration PCISA-PV-D4251_N4551_D5251 - Manual (Page 92)

PCISA-PV-D4251/N4551/D5251 CPU Card
Page 79
5.4.1 Host Bridge Configuration
Use the Host Bridge Configuration menu (BIOS Menu 15) to configure the Northbridge
chipset.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Chipset
> OnChip VGA Configuration
Initate Graphic Adapter [IGD]
******* Memory Information *******
Memory Frequency
667 Mhz
Total Memory
1024 MB
DIMM#0 1024
MB
DIMM#1 Not Present
Select which graphics
controller to use as the
primary boot device.
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 15: Host Bridge Chipset Configuration
Î Initiate Graphics Adapter [IGD]
Use the Initiate Graphics Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration
options are listed below:
ƒ IGD D EFAULT
ƒ PCI/IGD