2 usb device connection, Figure 4-12: lan connection – IEI Integration PCISA-PV-D4251_N4551_D5251 User Manual

Page 69

PCISA-PV-D4251/N4551/D5251 CPU Card

Page 56

Step 1:

Locate the RJ-45 connectors. The locations of the RJ45 connectors are

shown in Chapter 3.

Step 2:

Align the connectors. Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the PCISA-PV-D4251/N4551/D5251. See Figure 4-12.

Figure 4-12: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the on-board RJ-45 connector.

Step 0:

4.6.2 USB Device Connection

There are two external USB 2.0 connectors. To connect a USB 2.0 or USB 1.1 device,

please follow the instructions below.

Step 1:

Located the USB connectors. The locations of the USB connectors are shown

in Chapter 3.

Step 2:

Align the connectors. Align the USB device connector with one of the

connectors on the PCISA-PV-D4251/N4551/D5251. See Figure 4-13.