beautypg.com

4 lvds voltage selection, Figure 4-5: com 2 function select jumper location, See figure 4-5 – IEI Integration PCISA-PV-D4251_N4551_D5251 User Manual

Page 62: Figure 4-5

background image

PCISA-PV-D4251/N4551/D5251 CPU Card

Page 49

Figure 4-5: COM 2 Function Select Jumper Location

4.4.4 LVDS Voltage Selection

WARNING:

Permanent damage to the screen and PCISA-PV-D4251/N4551/D5251

may occur if the wrong voltage is selected with this jumper. Please

refer to the user guide that cam with the monitor to select the correct

voltage.

Jumper Label:

J_VLVDS1

Jumper Type:

6-pin header

Jumper Settings:

See Table 4-5

Jumper Location:

See Figure 4-6

The LVDS Voltage Selection jumper allows the LVDS screen voltage to be set. The

LVDS Voltage Selection jumper settings are shown in Table 4-5.

LVDS Voltage Select

Description

Short 1-2

+3.3 V

Default

Short 2-3

+5 V

See also other documents in the category IEI Integration Hardware: