IEI Integration PCISA-PV-D4251_N4551_D5251 - Manual (Page 85)

PCISA-PV-D4251/N4551/D5251 CPU Card
Page 72
Î
Enabled D EFAULT Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.
Î
IO=3E8h;
IRQ=11
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ11
Î
IO=3E8h;
IRQ=10, 11
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ10, 11
Î
IO=2E8h;
IRQ=10, 11
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ10, 11
5.3.5.2.4 Serial Port 3 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled Disable the serial port
Î
Enabled D EFAULT Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.