Extron Electronics VTR001 User Guide User Manual
Page 16
6.
Insert the wall box or wall bracket into the opening, and attach it to the wall, stud, or
furniture, leaving the front edge flush with the outer wall or furniture surface.
1-gang wall box.eps
Installation Cable
Cable Clamp
Wall Stud
Installation Cable
Cable Clamp
Wall Stud
Screws or Nails
Screws or Nails
Figure 7.
Attaching a Wall Box to a Wall Stud
•
To attach a wall box to wood, use four #8 or #10 screws or 10-penny nails. A
minimum of 0.5 inch (1.3 cm) of screw threads must penetrate the wood.
•
To attach a wall box to metal, use four #8 or #10 self-tapping sheet metal screws or
machine bolts with matching nuts.
7.
Mount the modules onto a faceplate or frame, then cable and test the
transmitter/receiver modules before fastening it into the wall box or bracket. The cables
are inaccessible after installation.
VTT001 and VTR001 User Guide • Installation
11