XLT XD-9005B - Manual (Page 81)

Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
81 AVI HOOD CLEANING
Your AVI hood is constructed of stainless and aluminized steel. Check application restric-
tions on product label prior to usage. Observe recommended precautionary and safety measures as
dictated by the product manufacturer.
Do not use abrasive or caustic cleaners. Abrasive pads will scratch stainless steel surfaces.
Areas with heavy buildup should be sprayed and allowed to soak for up to 5 minutes prior to wip-
ing clean. Always wipe with the “grain” of the surface to maintain appearance.
Refer to the Hood Installation Section for disassembly and reassembly.
Cleaning
Wipe down Front, Sides, & Top □
Clean Light Globes □
Empty & Clean Grease Trays □ □
Clean Grease Filters □ □
Clean Duct and Exhaust Fan □ □
Inspection
Check Indicator Lamp □
Check Grease Trays □
Check Grease Filters □
Adjust
No Adjustments Necessary
Lubricate
No Lubrication Required
Replace
Light Bulbs □
Hood Cleaning & Maintenance Schedule
Daily Weekly Monthly
Semi-
Annual
As Required
Schedule provided as a guide only. Frequency of cleaning may vary as needed.
Oven must be cool and the electric cord unplugged before any cleaning is done.
DANGER
DO NOT spray liquid cleaning agents in the slots & holes of the following loca-
tions:
 Hood electrical box (located on back of upper portion)
 VFD Controller
 Back of control box
 Underneath control box
CAUTION
Shroud Panels can weigh up to 60 lbs [27 kg]. Use caution when lifting.
CAUTION