Dry heat therapy, Model tt-101, Model tt-101l – Whitehall Manufacturing TT-202 User Manual
Page 2: Model tt-202
Model tt-101
10lb unit w/ optional stand
Model tt-101l
12lb unit w/ optional stand
Model tt-202
40-50lb unit
(front & rear views)
Model tt-101
39
www.whitehallmfg.com
(800) 782-7706
(626) 968-6681
dry heat therapy
The
TT-101
model is designed to sit on a table, floor or stand and treat one extremity
at a time. The heater is thermostatically-controlled and quickly provides Celstim up to a
maximum safety switch-limited 128°F (53.3°C). Treatment time is controlled by a built-
in timer, and Celstim temperature is indicated by a digital thermometer. The Celstim
capacity is approximately 10 lbs. (4.5 kg) with the heated airstream provided by a single,
noise-reduced, variable speed blower.
The Thermo-Therapy dry heat process offers the same benefits as hydrotherapy
without the cleanup. Extremities are inserted into an environment akin to a
dry whirlpool, where they are warmly massaged by granulated cellulose called
Celstim, which emulates the very pleasant rolling and relaxing effects of water.
Within the chamber, heated air swirls the Celstim around the arm or leg, which
retains mobility. Extremities experience a stimulating effect that improves
circulation. Thermo-Therapy has also been proven to assist greatly in the
desensitization of various scars or other types of nerve pain.
The
TT-101L
is designed for use in a small clinic or
office, and is virtually the same as the TT-101, but with a
larger chamber and capacity to treat more of the arm or
leg. The TT-101L is" 3” (76 mm) deeper and 2” (50 mm)
longer with a Celstim capacity of approximately 12 lbs.
(5.9 kg). The TT-101 and TT- 101L can be ordered with an
optional stand on casters.
Model
TT-202's
extra large treatment chamber
has an approximate 40 lb. (18 kg) Celstim
capacity with two top and rear entry ports
to treat both arms or both feet at the same
time. Two blower motors combine with the
heater and are individually controlled through
independent speed manipulation to provide
varying airflow patterns. This allows for a
specific "dry whirlpool" effect to create the
most therapeutic dry heat environment.