Whitehall Manufacturing 1109 series - Manual

1109
Model Number & Options______________________________________________Quantity___________
Company_________________________________________________________Date_______________
Contact_____________________________________Title_____________________________________
Approval for Manufacturing/Signature_____________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options______________________________________________Quantity___________
Company_________________________________________________________Date_______________
Contact_____________________________________Title_____________________________________
Approval for Manufacturing/Signature_____________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
MODEL NUMBER AND OPTIONS SELECTION:
BASE MODEL NUMBER
o
o
o
o
o
o
o
o 1109-1 Grab Bar with Closure Plate, 24" Long
1109-2 Grab Bar with Closure Plate, 30" Long
1109-3-L Left Orientation Two-Wall Grab Bar with Closure Plate, 32" x 18" Long
1109-3-R Right Orientation Two-Wall Grab Bar with Closure Plate, 18" x 32" Long
1109-4
Grab Bar with Closure Plate, 36" Long
1109-5 Grab Bar with Closure Plate, 42" Long
1109-6 Grab Bar with Closure Plate, 48" Long
1109-7 Grab Bar with Closure Plate, 18" Long
Ligature Resistant Grab Bars
Grab Bars are designed to help meet the needs of the
disabled. Grab bars are constructed of 1-1/2" outer
diameter type 304 stainless steel tubing with a 14 gage
closure plate welded to the bottom of the bar and includes 3"
diameter wall flanges. Bottom closure includes intermittent
welds along the grab bar with small holes opposite the grab
bar to prevent pooling of water and allow water to drain.
Flanges have countersunk holes for furnished 2" long
stainless steel vandal-resistant screws. Exposed surfaces are
polished to a satin finish. Grab bars meet or exceed ANSI,
UFAS and ADA requirements for structural strength and
have a 1-1/2" space between the grab bar and the
mounting surface. Selection of appropriate length,
configuration, adequate wall backing and installation
dependent on application will determine compliance for
accessibility. Consult applicable codes for complete
requirements. Compliance is subject to the interpretation and
requirements of the local code authority. Grab bars are not
recommended for installation in areas of high security.
1109-2
DIM "A"
32"
(813)
18"
(457)
MODEL NO. DIM "A"
1109-1 24" (610)
MODEL # 1109-3-L
1109-2 30" (762)
1109-4 36" (914)
1109-5 42" (1067)
1109-6 48" (1219)
2
1
4
"
(51)
FLANGE DETAIL
NOTES:
1.
3.
2
1 3
3
SECTION A-A
1"
(25)
2.
w/ Anchoring Flange
3
1
1
8
" (28)
Typical
Ш3" (76)
Ш 9
32
"
(7.14)
1-1/2" O.D. Stainless Steel Tube
Intermittent Welded Closure Strip
3" O.D. Stainless Steel Flange
1109-7 18" (457)
Recyclable
Product
Member of
U.S. Green
Building
Council
All dimensions are nominal and subject to
manufacturer's change without notice. Whitehall
assumes no responsibility fo use of void or
superseded data
© Whitehall Manufacturing,
Member of Morris Group International.
Please visit www.whitehallmfg.com for most
current specifications.
Best-Care
™
Healthcare and Ligature
Resistant Products
Last Update: 11/14/13