Whitehall Manufacturing 4035BIS - Manual

Whitehall
Swivette™ with
Bedpan Washer Cabinet
and Built-In Seat
Includes Models
4030BIS, 4032BIS, 4035BIS
C abinet exterior surfaces are high pressure laminate. Bedpan Washer Cabinet mounts on toilet side of
Interior surfaces are stain-resistant melamine laminate cabinet and includes a hand-held bedpan washer with
and stainless steel. Interior has a removable stainless volume control, positive shut-off and stainless steel
steel floor to conceal frame anchors. Specify cabinet hose.
color selection.
Counter has a 3" backsplash and a bullnose front
edge. Surface is high pressure laminate. Built-In Seat is
an integral part of the countertop. Specify counter color
selection.
Lavatory is heavy gage, type 304 stainless steel, self-
rimmed, furnished with P-trap and wall flange. Lavatory
is always located on the opposite side of the toilet.
GUIDE SPECIFICATION
Lavatory Valve is a deck-mounted, hot and cold Provide and install Whitehall Swivette™ (specify model
mixing valve with wrist blade handles and a 10" rigid number and options). Cabinet frame shall be heliarc
gooseneck. welded, type 304 stainless steel, and shall not require
wall support. Cabinet doors and panels shall be high
Toilet is stainless steel, siphon jet type with white
pressure laminate. Door on toilet side shall be linked to
plastic seat and self-sustaining check hinge. Door
toilet, so that when door is opened or closed, the toilet
linkage swivels the toilet into the room when cabinet
will swivel accordingly. Door on lavatory side shall be
door is opened. The toilet is locked in place when open
provided with a toilet paper holder. Doors shall support
and must be unlatched to close. Toilet operates with a
a 250 pound static, vertical load. Front panels shall 1.6 GPF flush valve.
hinge open for access to valves and piping. Bedpan
Hydraulic Flush Valve is furnished with a 1-3/4"
storage cupboard shall be provided above the toilet.
diameter, hydraulically actuated, remote pushbutton.
Cabinet shall provide front toe space. Counter shall be
Minimum required flow pressure is 25 PSI with a
high pressure laminate with a 3" backsplash and
minimum water consumption of 1.28 GPF.
bullnose front. Lavatory bowl shall be heavy gage, type
Swivel Assembly is cast iron with a sanitary white 304 stainless steel, self-rimmed, rectangular type, 9-
Enviro-Glaze finish, and has a positive watertight, 1/2" x 14-1/2" x 6" deep. P-trap shall be furnished.
chemical resistant seal. Swivel assembly requires floor Toilet shall be stainless steel, elongated, siphon jet
anchoring by others. Toilet will withstand a 2,500 type, and shall flush in any position along the arc of
pound static vertical load. movement. Trap shall pass a 2-1/8" ball. Toilet shall
withstand loadings of 2,500 pounds without permanent
Floor Anchors are seismic rated for CBC category IV
damage. Toilet seat shall have self-sustaining check structures.
hinge. Toilet to flush with a 1.6 GPF flush valve.
An elevated pressure type vacuum breaker
by others is recommended with this feature to
prevent back-siphonage or backflow occurring
and possibly contaminating the water supply.
C o n s u l t l o c a l c o d e s a n d o r d i n a n c e s f o r
requirements. Optional -BWD Bed Pan Washer Drain
is recommended.
Bedpan
washer cabinet shall include a hand-held bedpan
washer with positive shut-off and stainless steel hose.
Fixture May Show Some Available Options
4030BIS-L-1
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
4030BIS
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
® Care-Ware Bedside Patient
Care Units
Please visit www.whitehallmfg.com
for most current specifications.
Recyclable
Product
Member of
U.S. Green
Building
Council
Complies
with the
following
standards:
Water
Conserving
Product
Last Update: 09/25/13