Whitehall Manufacturing 4015BIS User Manual
Care-ware, Whitehall swivette™ with built-in seat
Whitehall
Swivette™ with
Built-In Seat
Includes Models
4010BIS, 4012BIS, 4015BIS
Cabinet exterior surfaces are high pressure
Swivel Assembly is cast iron with a sanitary
laminate. Interior surfaces are stain-resistant
white Enviro-Glaze finish, and has a positive
melamine laminate and stainless steel. Interior has
watertight, chemical-resistant seal. Swivel
a removable stainless steel floor to conceal frame
assembly requires floor anchoring by others. Toilet
anchors. Specify cabinet color selection.
will withstand a 2,500 pound static vertical load.
Counter has a 3" backsplash and horizontal,
Floor Anchors are seismic rated for CBC category
bullnose front edge. Built-In Seat is an integral
IV structures.
part of the countertop. Surface is high pressure
GUIDE SPECIFICATION
laminate. Specify counter color selection.
Provide and install an Whitehall Swivette™ (specify
Lavatory is heavy gage, stainless steel, self-
model number and options). Cabinet frame shall
rimmed, furnished with P-trap and wall flange.
be heliarc welded, type 304 stainless steel, and
Lavatory is always located on the opposite side of
shall not require wall support. Cabinet doors and
the toilet.
panels shall be high pressure laminate. Door on
Lavatory Valve is a deck-mounted, hot and cold
toilet side shall be linked to toilet so that when
mixing valve with wrist blade handles and a 10"
door is opened or closed, the toilet will swivel
rigid gooseneck and conforms with CHSC 118675
accordingly. Door on lavatory side shall be
lead free requirements.
provided with a toilet paper holder. Doors shall
support a 250 pound static, vertical load. Front
Toilet is stainless steel, siphon jet type with white
panels shall hinge open for access to valves and
plastic seat and self-sustaining check hinge. Door
piping. Cabinet shall provide front toe space.
linkage swivels the toilet into the room when
Counter shall be high pressure laminate with a 3"
cabinet door is opened. The toilet is locked in place
backsplash, horizontal bullnose front and built-in
when open and must be unlatched to close. Toilet
seat. Lavatory bowl shall be heavy gage, stainless
operates with a 1.6 GPF flush valve.
steel, self-rimmed, rectangular type, 9-1/2" x 14-
Hydraulic Flush Valve is furnished with a 1-3/4"
1/2" x 6" deep. P-trap shall be furnished. Toilet
diameter, hydraulically actuated, remote
shall be stainless steel, elongated, siphon jet type,
pushbutton. Minimum required flow pressure is 25
and shall flush in any position along the arc of
PSI with a minimum water consumption of 1.28
movement. Trap shall pass a 2-1/8" ball. Toilet
GPF
shall withstand a loading of 2,500 pounds without
permanent damage. Toilet seat shall have self-
sustaining check hinge. Toilet to flush with a 1.6
GPF flush valve.
Fixture May Show Some Available Options
Please visit www.whitehallmfg.com
for most current specifications.
4010BIS-L-1-CSP
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
4010BIS
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
®
Care-Ware
Bedside Patient
Care Units
Please visit www.whitehallmfg.com
for most current specifications.
Recyclable
Product
Member of
U.S. Green
Building
Council
Complies
with the
following
standards:
Water
Conserving
Product
Last Update: 09/25/13