Whitehall Manufacturing E-27-S - Manual (Page 2)

MODEL NUMBER AND OPTION SELECTIONS
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862
Extremity Whirlpools
All dimensions are nominal and subject to manufac-
turer’s change without notice. Whitehall assumes no
responsibility for use of void or suspended data. © 2008
Whitehall Manufacturing, A Division of Acorn Engineering
Company. Please visit
www.whitehallmfg.com for most
current specifications.
Model Number & Options_____________________________________________ Quantity_____________
Company_________________________________________________________ Date___________________
Contact________________________________________________ Title______________________________
Approval for Manufacturing/Signature_______________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
E-27-S Last Update: 6/1/11
m -EG Enviro Glaze Color Powder Coating -
Specify Color:________________________
(Special Finish Consult Factory)
m -GFI Ground Fault Interrupter
m -MXT1 Thermostatic Mixing Valve (15 G.P.M.)
m -MXT2 Thermostatic Mixing Valve (25 G.P.M.)
m -MXWH Washout Hose Attachment for MXT Valves
m -PCS Pump Cover Strainer
m -RHG Rubber Hand Grips
m -SDO Separate Drain and Overflow Assembly
Turbine Assembly
Electrical on standard turbine supplied is 115 V 60 Hz
if 220 V is required please specify:
m 50 Hz m 60 Hz
Series
m -E Extremity Series
Capacity
m -27 Gallons
Type
m -S Stationary Whirlpool
Suffix Options (See Whirlpool Option Section for Details)
m -AHC1 Adjustable High Chair with Casters
m -AHC2 Adjustable High Chair with Rubber Tips
m -ALC Adjustable Low Chair
m -ALS Adjustable Low Stool
m -ARS Arm Rest Support
Note: Electrical requirements are 8 Amps / 115 Volts/ 60Hz/ 3 Pole GFI Receptacle.
ELECTRIC REQUIREMENTS:
Amps: 8
Volts: 115
Hertz: 60
GFI Receptacle
Certified per
European Standards;
IEC 60601-1
Certified per US &
Canadian Medical
Standards; UL 60601-1 &
CSA C22.2 No. 601.1 All dimension figures in parentheses are
in millimeters.