Whitehall Manufacturing H-75-S - Manual

Product photo/image above may show some available options
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862
H-75-S
H Series
75 Gallon
Stationary Whirlpool
H-75-S
Hi-Boy Whirlpools
Last Update: 9/15/09
Whitehall H-75-S Stationary Whirlpool is
recommended for shallow or deep body immersion
offering complete coverage of the lower extremities
as well as the lower back and hip.
Tank Capacity is 75 gallons.
Whirlpool Tank is 42”L x 20”W x 28”D and is
seamless welded construction, fabricated from heavy
gauge, type 304 stainless steel, polished to a satin
finish. Tank rim is reinforced with a concealed stain-
less steel rod. Tank bottom is seamless, rounded
coved design to minimize bacteria buildup. Tank
is also provided with an extended stainless steel
skirt flush to the floor line to conceal internal drain
piping.
A 2” Combination Drain and Overflow, and a Filler
Spout are provided. (See roughing-in dimensions
on the reverse side).
Turbine Raising and Lowering Device permits
adjustment of desired height and direction of water
agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.
Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor pro-
tected with an ABS plastic shell, and auto-
matic
thermal overload protector, and
lifetime-sealed bearings. All parts contacting the
water are stainless steel, chrome plated brass or
bronze.
Thermometer is provided with a dual scale, adjust-
able calibration, and a stem inserts into a retainer
to prevent rattle during whirlpool agitation.
GUIDE SPECIFICATIONS
Provide Whitehall Stationary Whirlpool (specify model
number and options) with a 75-gallon capacity,
42”L x 20”W x 28”D. Whirlpool shall be fabri-
cated from heavy gauge, type 304 stainless steel.
Construction shall be seamless welded and exposed
surfaces shall be polished to satin finish. Tank shall
have a reinforced rim and shall be fitted with a
stainless steel skirt flush to the floor line. Bottom of
tank shall be a seamless, rounded coved design to
minimize bacteria build up. Provide a 2” combina-
tion drain and overflow, and a filler spout. Provide
a turbine assembly with raising and lowering
device which functions both as agitator and empty-
ing device, permits adjustment of desired height,
direction of water agitation, and can be locked into
place. Turbine assembly shall be UL listed 1/2 HP
jet pump motor with automatic thermal overload
protector, and lifetime-sealed bearings. Provide a
3” dial thermometer with a stem retainer to prevent
rattle when whirlpool is in operation.
Use
Member of
U.S. Green
Building Council
Recycleable
Product