White’s Electronics Spectra V3i User Manual

Page 47

Complete Guide to Spectra V3

Setup

– Special features for Expert Program manipulation.

Excludes – Apply chosen categories of selections stored in COMMON to any Program.

Comment – Apply a personal custom comment to any Program.

Program - Choose a program to add a comment.

Comment – MENU/TAB to Comment, press ENTER, use arrow and ENTER keys to

spell out the comment.

Exit – MENU/TAB to Exit, press ENTER to exit.

Library

– Manipulate Library Programs.

Store – Store a new Program in the Library or replace an existing Library Program.

Rename – Change the name of an existing Library Program.

Erase – Delete a custom Library Program. Factory standard Library Programs cannot be deleted.

DISCRIMINATION – Choose features that are used in the rejection of
unwanted trash metals.

Visual Reject

– “X” Prevents rejected VDI numbers and their associated

Icons from appearing on display during searching.

Bottle Cap Reject

– (Off – 20) – Adjusts iron rejection (how aggressively iron

is rejected). 20 = most aggressive iron rejection, 1 = least, off = no added

iron bias.

Hot Rock

– (OFF - +10) – Adjust mineral anomalies (VDI +95) cancellation or identification (hot rock)

rejection. -10 = most aggressive, off = no additional hot rock bias (all VDI numbers treated equally),

+10 = slight increase in +95 signal strength.

VDI Selected By

– Selects different methods of adjusting trash metal rejection.

Level – Provides a linear adjustment much like a control knob, below selection rejects, above

accepts.

Reject Level – Set the VDI numbers that “at” and are rejected.

Icon – Select trash rejection using the icons and their selected VDI ranges.

Edit – Press ENTER, “X” box = accepted. Empty box = rejected. Use arrow up and down and

ENTER to accept or reject by Icon ranges. Note, each Icon’s VDI ranges can be adjusted under

Icon Table, Custom/Edit.

V.D.I. – Select trash rejection by specific VDI number.

Edit – Press ENTER, “X” box = accepted. Empty box = rejected. Use arrow up and down and

ENTER to accept or reject by VDI number. Hold ENTER + ARROW to drag accept thru large

range changes.

Graph – Select trash rejection using a graph and VDI number reference.

Edit – Press Enter, use arrow left and right to see VDI number range and graph. At any given VDI

number arrow up accepts, arrow down rejects, shown on graph.

Icon Table

– Select sets of Icons specific to different types of searching.

Park – Icon set typical for parks and general coin shooting, common coins, jewelry, and trash.

Relic – Icon set suitable for historic areas, bullets, buckles, and iron.

Prospecting – Icon set suitable for gold prospecting, nuggets, hot rocks, iron.