White’s Electronics Spectra V3i - Manual (Page 15)

pg
First Time Out with Spectra V3 i - ”Turn On And Go” ...
Press ON/OFF.
Optionally… Press ZOOM to select text size.
Squeeze & release Trigger on the handle grip.
Hold Trigger & hold ENTER, pump search coil (loop) up and down on the ground until
background hum steadies, release ENTER… and then release Trigger and begin searching.
(Note releasing Trigger before releasing ENTER) locks Spectra in pinpoint mode, squeeze
and release trigger twice to unlock pinpoint.
Sweep search coil close to the ground, from side to side, overlapping each pass.
Locate a consistent “BEEP” upon several passes of the search coil.
Look at display. VDI, Blocks, and ICON, indicate a metal target worthy of digging.
Pinpoint squeeze & hold toggle on the grip and slowly “
+
” the area. Depth in inches and
maximum bars indicates target center.
Pinpoint -
A
S
S
E
M
B
L
Y
G
U
I
D
E
Complete Guide to Spectra V3 i Complete Guide to Spectra V3 i ® ®