White’s Electronics Spectra V3i User Manual

Page 25

Complete Guide to Spectra V3

• Common - A place to select options/features you can insert (section by section) from the expert Menu

into any other program. Example: set all the volume and tones the way you like them in Common. Then in the
Expert Menu, under the Program Section, the Setup feature, you can substitute your common audio preferences in
bulk (as a group of selections) into any program. Common is used similar to COPY/PASTE to avoid repetitive
detailing.

Note: COMMON, from the factory, contains a showroom demonstration program designed to work in

high interference indoor areas (Reduced Sensitivity) intended only for Dealer Showrooms or demonstrating and
experimenting with basic Spectra functions indoors.

• Using Common as a complete user-search program, you can set some or all preferred

levels and feature choices. Most categories of your COMMON settings can be substituted

to any Program effectively overriding all other selections for that category of options. It is

not necessary to set all categories for your common preferred settings.

• Expert, Program, Setup, Exclude allows you to exclude only the following sections

as complete groups of choices - Discrimination, Sensitivity, Volume & Threshold, Audio Tones,

Audio Modes, Frequency, Ground Tracking, Filter & Speed, and Configuration.

• To eliminate your Common selections for that program go to Expert, Program, Setup, Exclude,

and deselect sections for that Program by category then re-save that program.

• Original (Indoor Showroom) settings are automatically saved in the library under COMMON.

• Because of higher-level use, Common is the only Program that cannot be erased.

• Restore – Returns the specified Program to the original or last manually SAVED defaults. Changes

that were automatically saved will all return to their last manually saved defaults. In other words, if you have not
manually saved anything, Restore returns everything to original factory recommended settings for that program.

• Select RESTORE with ARROW Up & Down, then press ENTER.

• Use ARROW Up & Down to select the PROGRAM you wish to restore.

• Press MENU / TAB to toggle between highlighting RESTORE or CANCEL.

to RESTORE - Press

FROM

Use to select program. Use to highlight

RESTORE

Selected program displays check mark and is restored to factory settings.

•

Wireless Headphone “enable on/off setting is NOT changed by “Restore”.

•

Removing battery does NOT restore factory programs.

Press

TO RESTORE FACTORY PROGRAMS

RESTORE