White’s Electronics Spectra V3i User Manual

Page 29

Complete Guide to Spectra V3

Wireless Headphones –

Select Wireless Headphones and press ENTER.

• Press ENTER to Enable “X” in box” (turn on) Wireless Headphone transmitter.

• Press Wireless Headphone Power Button to turn ON Wireless Headphone. You will hear

the up tone.

•

Note: The Spectra and Spectra Wireless headphone are preset for automatic CONNECT on channel 4,

no further connection steps are initially required. Turn ON/OFF wireless headphone Power Button
automatically selects between the Spectra’s built in Speaker, and the wireless Headphones. However, once a
different channel has been selected, a Connect sequence is then required to Enable the Wireless Headphones.

• If there is significant wireless channel interference, the built in speaker will occasionally sound. A different

wireless channel should be considered.

• Connect Sequence “AFTER CHANNEL CHANGE” described below – MENU/TAB to Connect, Press

ENTER, Hold Power button on Wireless Headphone, beep-BEEP, beep-BEEP, and display
prompts indicates connection made, squeeze and release trigger to search
with wireless activated.

• Selecting a different wireless channel is provided to overcome any area wireless interference.

Wireless Headphone - Quick Connect

•

Select Audio or Zoom Audio

•

to Wireless Headphone. Press

•

Press to enable x

•

Press and hold headphone power button.

•

Headphone is connected within five seconds

when you hear... .

Headphones automatically turn off with the detec-
tor. To manually turn

OFF headphones, press head-

phone power button. You will hear
The metal detector speaker will
connect within ten seconds.

Audio

Audio Zoomed

SpectraSound System comes factory pre-connected (Channel 4)

allowing the “Quick Connect Sequence”.

Tips ...

•

Trigger to search.