Vestil SL-xxx-AA - Manual (Page 7)

7
Product description
Designated use
The stacker is designated for lifting, lowering and transportation of loads according to the specifications of the
identification plate.
The stacker is to be used on hard level surfaces.
To move the stacker between buildings, warehouses etc
The gradient of the slope must not be more than 10%
Make sure load is not loose or unstable.
Do not pick up loads on tips or forks or edge of platform.
Do not overload.
The road surfacing must be solid and have a good grip.
Travel routes must offer sufficient load-bearing capacity for the loaded truck.
The stacker is not suitable for continuous use in cool-houses!
Ambient conditions
Temperature From
To 14
113 ° F
° F
Degree of humidity ≤ 70 %
Permitted floor
incline
Loaded
Unloaded ¹
Max. 0.5
Max. 2.0
%
%
Dimensions and weights
Mass (dead weight) m 480/750 kg
WARNING!
The user is responsible for determining the actual load bearing capacity of a high-lift stacking truck. This can depend
on the user, the condition of both the floor and the high-lift stacking truck and the regularity of the maintenance
intervals.