Vestil D series hoppers - Manual (Page 7)

11/4/2013 D & H series hoppers, manual
Copyright 2013 Vestil Manufacturing Corp. Page 7 of 13
FIG. 3: Leak Proof H-Hopper (Option LEKP) Diagram and Parts List
Item no. Part no. Description Quantity
1 S929134-F1 Leak proof base frame weldment 1
2 S929134-C1A Leak proof chute weldment 1
3 37-537-012 Release lock lever assembly 1
4 S929134-CYL1-B 1 in. x 14 in. hydraulic cylinder body 1
5 S929134-CYL1-R 1 in. x 14 in. hydraulic cylinder rod 1
6 S929134-P4B Cylinder pin (body end) 1
7 S929134-P4A Cylinder pin (rod end) 1
8 37-112-003 Hinge axle pin hoppers (H style) 1
To dump a leak-proof H-hopper, simply pull the release lever. Once released, the cylinder will extend until the
chute dumps. Manually return the chute to the latched position.
8
2
3
1 6 7 4 5
DO NOT put or store corrosive substances in the chute of a hopper. Corrosion will damage the
chute and cause it to no longer be watertight. Similarly, do not allow water to accumulate in the chute, which will
allow rust to develop. Rinse the hopper chute after emptying contents, and dry the chute before filling it again.