Vanguard LTCA-10_40 User Manual
Page 52
LTCA-10/LTCA-40 USER’S MANUAL
52
5.9.4. Erasing a Test Record
Follow the steps below to erase a single test record or the entire directory of test records from the
LTCA-10/40’s Flash EEPROM.
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following menu will be displayed:
Press the
[3]
key (SAVE/RESTORE RECORD)
c. The following menu will be displayed:
Press the
[4]
key (ERASE RECORD)
d. The “ERASE RECORD” menu will be displayed:
Press the
[STOP]
key if you would like to end the process and return to the “START-
UP” menu. Otherwise, select one of the menu options described below:
1. ERASE SINGLE RECORD
Press the
[1]
key (ERASE SINGLE RECORD) to erase a single record. You will
be presented with the following screen:
ERASE RECORD
NUMBER: XX
ERASE RECORD
1. ERASE SINGLE RECORD
2. ERASE ALL RECORDS
“STOP” TO EXIT
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
1. ENTER XFMR ID
2. PRINT RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET FONT
1. TEST XFMR
03/04/09
2. SETUP 09:28:03
3. USER DIAG