Vanguard EZCT-2000 - Manual (Page 40)

EZCT-2000 VERSION 1.x SOFTWARE MANUAL REV 1
38
5.4 Creating Test Plans
To create a test plan:
1. Click on the Test-Plan menu and select Create Test Plan (alternatively, you can click on
the File menu, click on Test Plan, and then select Create Test Plan). The following
window will be displayed:
2. Select the CT Tester model that the test plan is being created for by clicking on the
corresponding radio button in the “Select device type test plan” section at the top of the
window. Any options that are not supported by the selected device will be grayed out.
Also, the excitation voltage drop-down lists will be updated to only display voltages
supported by the selected device.
3. Enter the relevant header information at the top of the form (such as Company name,
Station name, etc.).
4. Select the knee point marker from the “Knee Point Marker:” drop-down list.