Vanguard ATO-600 - Manual (Page 24)

ATO-400 / ATO-600 Operating Procedures
24
Table 5.0 Run Test Procedure (Measure an Unknown Resistance Continued)
ITEM ACTION ATO DISPLAY
5-17 If key #1 is pressed, the test record will be
erased from memory and the display
returns to the “START MENU”. If key
#2 is pressed, the test record will be saved
in Flash EEPROM. The test record
number assigned to this record will be
displayed. Exit the RECORD SAVED
display by pressing ENTER, which
returns the display to the START MENU.
This ends the RUN NORMAL TEST procedure.
1. RUN TEST 04/11/05
2. SETUP 12:24:01
3. DIAGNOSTIC