beautypg.com

TREND GV Series User Manual

Gv series, Class ‘a‘ gas valves, Application

background image

GV Series Data Sheet TA200888 Issue 1/A 05/09/05

1

EN2C-0053SZ20 R0705

GV Series

CLASS ‘A‘ GAS VALVES

DATA SHEET

APPLICATION

These series class 'A' gas valves are used for control and

regulation of gaseous fluids in gas power burners,

atmospheric gas boilers, melting furnaces, incinerators and

other gas consuming appliances.
Models

GV Series solenoid gas valves:
threaded:

GVS20-230 (DN20, ¾")

GVS50-230 (DN50, 2")

GVS25-230 (DN25, 1")

GVS65-230 (DN65, 2½")

GVS32-230 (DN32, 1¼")

GVS80-230 (DN80, 3")

GVS40-230 (DN40, 1¾")
flanged:

GVF65-230 (DN65, 2½")

GVF100-230 (DN100, 4")

GVF80-230 (DN80, 3")
All versions are provided with 1/4" bottom plug to

accommodate a Closed Position Indication switch

accessory (GVCPI).
Duty cycle

Coil suitable for permanent energization.
Opening time

Less than 1 second
Closing time

Less than 1 second
Maximum working frequency

20 cycles per minute

SPECIFICATIONS

Pipe sizes GVS series

Inlet and outlet 20 mm (¾") up to 80 mm (3") internal parallel

pipe thread according to ISO 7-1
Pipe sizes GVF series

Flanged connection DN65 (2½"), DN80 (3"), and DN100

(4") according to PN16 ISO 7005-1.

Torsion and bending stress

Pipe connections meet group 2 according to EN161

requirements.
Ambient temperature

-15 °C ... 60 °C
Supply voltage

220 ... 240 Vac, 50/60 Hz

The applicable voltage is applied to the solenoid coil via a

rectifying circuit.
Maximum operating pressure

200 mbar
Electrical connection

Plug connection according to PG 11.
Coil insulation solenoid valves

Insulation material according to class F.
Operational voltage range

The gas valve will function satisfactorarily between 85% and

110% of rated voltage.
Enclosure

IP 54
Capacity in m

3

/h air at Dp = 2.5 mbar

DN20

14.8

DN25

16.7

DN32

38.5

DN40

47.1

DN50

66.7

DN65

94.2

DN80

131.0

DN100 225.0
Strainer

A strainer is incorporated in the gas valve.

Approvals

Class 'A' in accordance with EN161

Safety: EN60335 household and industrial

EMC standards for industrial and non-industrial appliances

Gas Appliance directive (90/396/EEC)

Low Voltage directive (73/23/EEC)