TREND EM_RX2 - Manual (Page 4)

EM/RX2 Installation Instructions
EM/RX2 Three Phase Electricity Meter Installation Instructions TG200133 Issue 3 04/03/08 4
Please send any comments about this or any other Trend technical publication to [email protected]
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens,
Route du Bois 37,Switzerland by its Authorized Representative, Trend Control Systems Limited.
©Trend Control Systems Limited 2007. Trend Control Systems Limited reserves the right to revise this publication from time to time and
make changes to the content hereof without obligation to notify any person of such revisions or changes.
Trend Control Systems Limited
P.O. Box 34, Horsham, West Sussex, RH12 2YF, UK. Tel:+44 (0)1403 21888 Fax:+44 (0)1403 241608 www.trend-controls.com
Trend Control Systems USA
6670 185th Avenue NE, Redmond, Washington 98052, USA. Tel: (425)897-3900, Fax: (425)869-8445 www.trend-controls.com
PAGE SET
V1
Volts Input
V3 V2 Output
CT 1 CT 2 CT 3
24v Max
KLIK 2 DUAL PULSE MULTI FUNCTION ENERGY METER
SINERGY LTD. SK6 7GP ENGLAND Tel: 01663 764833
Pulse
Configure IQ 13
T e s t
14
IQ
kWh
IQ Configuration
Manual 90-1533
or
IQ
IQ
Check Meter 10
Set up Auto Scroll 11
Reset Peak Demand only 12
if required
if required
Current Phase 1, - Current
Phase 2, - Current Phase 3, -
System Voltage, - Frequency/
Power Factor, - Peak Demand, -
Instaneous Power, -
Instantaneous Apparent Power, -
Instantaneous Reactive Power,
- Energy Consumption, -
Apparent Energy Consumption,
- Reactive Energy Consumption
Manually scroll through pages
PAGE SET
V1
Volts Input
V3 V2 Output
CT 1 CT 2 CT 3
24v Max
KLIK 2 DUAL PULSE MULTI FUNCTION ENERGY METER
SINERGY LTD. SK6 7GP ENGLAND Tel: 01663 764833
Pulse
PAGE SET
V1
Volts Input
V3 V2 Output
CT 1 CT 2 CT 3
24v Max
KLIK 2 DUAL PULSE MULTI FUNCTION ENERGY METER
SINERGY LTD. SK6 7GP ENGLAND Tel: 01663 764833
Pulse
PAGE SET
V1
Volts Input
V3 V2 Output
CT 1 CT 2 CT 3
24v Max
KLIK 2 DUAL PULSE MULTI FUNCTION ENERGY METER
SINERGY LTD. SK6 7GP ENGLAND Tel: 01663 764833
Pulse
INSTALLATION
(continued)
15 secs
15 secs
Peak Demand
Count pulses; pulse value:
0 0 2 / h W k 1 . 0
0 0 5 / h W k 1 . 0
0 0 0 1 / h W k 0 . 1
CLr No
CLEAR REGISTERS
AND PEAK DEMAND
No
Yes
CAL9
L1 1588
CALIBRATION
CAL9 CAL0
(if reset not required) (if resetting)
OR
Configure Meter (continued)
9
continued from last page
AMPS
WEEE Directive:
At the end of their useful life the packaging
and product should be disposed of by a suitable
recycling centre.
Do not dispose of with normal household waste.
Do not burn.
DISPOSAL
RUN MODE