Using qualiphy, Accessing the software – Teledyne LeCroy QPHY-PCIe3-Tx-Rx User Manual
Page 9
QPHY-PCIE3-TxRx
Operator’s Manual
923662 Rev B
5
Using QualiPHY
This section provides an overview of the QualiPHY user interface and general procedures,
using examples from the QPHY-BroadR-Reach option. For detailed information about the
QPHY-PCIE3-TxRx software option, see
Accessing the Software
Once QualiPHY is installed and activated, it can be accessed from the oscilloscope menu bar by
choosing Analysis > QualiPHY, or by double-clicking the QualiPHY desktop icon on a remote
computer.
The QualiPHY framework dialog illustrates the overall software flow, from general set up through
running individual compliance tests. Work from left to right, making all desired settings on each
sub-dialog.
Figure 1 - QualiPHY framework dialog and Standard selection menu.
The sub-dialogs are organized into tabs each containing configuration controls related to that
part of the process. These are described in more detail in the following sections.
If Pause on Failure is checked, QauliPHY prompts to retry a measure whenever a test fails.
Report Generator launches the manual report generator dialog.
The Exit button at the bottom of the framework dialog closes the QualiPHY application.