Teledyne LeCroy PETracer PCI Express Edge User Manual - Manual (Page 20)

Chapter 2: Hardware Description PETracer Edge User Manual
12
Teledyne LeCroy
Trigger Events
Reporting and Statistics
Basic Trigger Events Error, Link Up/Down, TX1, Ts2, FTS, Any TLP, Config Rd, Config Wr,
IO Rd, IO Wr, Mem Rd, Mem Wr, Message, Completion, InitFC1,
InitFC2, ACK, NAK, PM
Link Conditions Link Alive, Electrical Idle Link Condition, TS1 Ordered Set,
TS2 Ordered Set, Skip Ordered Set, Electrical Idle Ordered Set,
FTS Ordered Set, DLLP, TLP
Payload Customizable Payload, Mask, Match
Errors Delimiter, EDB (End-of-Bad Packet), Disparity, Symbol, Idle data,
Ordered Set Format
Transport Layer Packet
(TLP) Memory Read 32-bit, Memory Read 64-bit, Memory Write 32-bit,
Memory Write 64-bit, I/O Read Request, I/O Write Request,
Configuration Read Type 0, Configuration Write Type 0,
Configuration Read Type 1, Configuration Write Type 1, Message,
Message with Data, Completion, Completion with Data,
Completion for Locked Memory Read, Completion for Locked
Memory Read with Data, Requesters, Completers,
Traffic Class Number, Virtual Channel ID Number
Data Link Layer Packet
(DLLP) Ack, Nak, PM, Vendor, InitFC1-P, InitFC1-NP, Init-FC1-Cpl,
Update FC-P, Update FC-NP, Update FC-Cpl, InitFC2-P, InitFC2-NP,
Init-FC2-Cpl, Flow Control
Link Transactions Implicit, Explicit, Incomplete
Split Transaction Successful Completion, Unsupported Request, Cfg Request Retry,
Completer Abort, Incomplete
Error Reports Invalid 10b code, Running Disparity Error, End of Bad Packet,
Delimiter Error, Ordered Set Format Error, Idle Error