Teledyne LeCroy Automation API for IBTrainer Software Ver.2.0 - Manual (Page 147)

CATC IBTrainer InfiniBand Exerciser API Reference 4-1
Properties and Programmatic Settings
The following lists of properties are used to program the IB Trainer . You
can set all properties directly. Some settings have a generic impact on
the behavior of the generator; these are listed under
Generator
Properties below. Certain settings can be made with any packet; these
are listed under “Status Properties” on page 4-3 .
Some values necessary for the generation of packet headers are
supplied by the global property lists or are set by a subnet manager
(source is the local id). These values can be preset in a packet using the
call PacketInit() in the class generator.
Generator Properties
Generator properties control the behavior of the generator. They also
influence the content of headers of outgoing packets. The prefix IG__
stands for generic generator properties. Header properties have an
appropriate prefix (LRH_ or AECK_). The IGCGenerator method PacketInit()
initializes packets with the correct header information.