Teledyne LeCroy WaveAce - Manual (Page 82)

Getting Started Manual
WA-GSM-E RevB 82
Figure 4-6. As the screen indicates, press the RUN/STOP front panel
button three times to perform the Keyboard Test and exit.
Figure 4-7. Each press of the SINGLE front panel button colors a symbol
representing a front panel button and illuminates the button on the
actual front panel. Test as many LEDs as desired. As the screen indicates,
press the RUN/STOP front panel button to exit.
2. Press the Print Setup option button to set up your print options.
The Print menu (Page 1/2) is shown.
PLEASE NOTE THE FOLLOWING:

After using an option button to select either the Do Self Test,
and Print Setup (when enabled) functions, more options are
then shown. You can return to the original menu by pressing
the UTILITY front panel button.