Teka HPL 870 - Manual (Page 37)

37
ENGLISH
Timer Alarm: The alarm will go off at the
programmed time, even if the oven has
finished cooking.
Cooking Time: This function allows you to
programme the cooking time, after which the
oven will turn off automatically.
Cooking Stop Time: This setting allows you to
programme the time for cooking to stop, after
which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This
setting allows you to programme the cooking
time and cooking stop time. The oven switches
on automatically at the set time and operates
for the selected cooking time (Cooking Time).
It then switches off automatically at the
indicated time (Cooking Stop Time).
Programming the Timer Alarm
1. Touch sensor with your finger tip until
symbol star ts flashing on the display.
The clock will also flash 00:00.
2. Select the time after which you want the
alarm to sound by pressing the + or –
sensor.
3. You will hear 2 beeps to confirm that the
time has been set. The clock will star t
counting down from the selected time and
symbol
will flash slowly.
4. When the time is up, the alarm will go off
and symbol will flash quickly.
5. Touch any sensor to stop the alarm.
Symbol will switch off.
If you want to change the timer alarm, simply
touch sensor
with your finger tip and
then press the + or – sensor. You will hear 2
beeps to confirm that the time has been
changed. The clock will star t counting down
from the new time and symbol
will flash
slowly.
NOTE
You cannot see the current time on the display
when the timer alarm is set.
Programming Cooking Time
1. Touch sensor with your finger tip until
the AUTO symbol star ts to flash and 00:00
appears on the display.
2. Select the cooking time by pressing the +
or – sensor.
3. You will hear 2 beeps, the AUTO symbol will
flash slowly and the display will show the
time left before the oven switches off
automatically.
4. Select a cooking function and temperature.
5. Once the cooking time is up, the oven will
turn off, an alarm will sound and the AUTO
symbol will flash quickly.
6. Touch any sensor to stop the alarm and to
turn off the AUTO symbol.
You can change the remaining cooking time at
any time by touching sensor
with your
finger tip until the AUTO symbol star ts to flash
quickly. Now touch the + or – sensor to change
the time.
NOTE
You cannot see the current time on the display
when the cooking time is set.
Electronic Clock Settings
3172493-000 EPIFA.QXD:- 30/9/11 08:59 Página 37