Steelcraft Automotive 133800 RUNNING BOARD User Manual
Page 2
VIEWPOINT ALUMINUM RUNNING BOARD
2010-12 TOYOTA 4RUNNER
SR5 AND LIMITED MODELS (EXCL TRAIL EDITION)
Page 2 of 3
9/17/12 Rev1(DP)
To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Running Board.
For gloss black finishes: Mild soap may be used to clean the Running Board Brackets.
Passenger Side Installation Pictured
(Fig 1) Passenger side front mount pictured
Fig 2
(Fig 3) Passenger side rear bracket location pictured
Install the Mounting Brackets
one at a time over the factory
rocker panel brackets
Remove factory hex bolts
Front
Rear
(Fig 4) Insert T-Bolts into channels
on bottom of Running Board
(2) 8mm x 30mm Hex Bolts
(2) 8mm Flat Washers
(2) 8mm Lock Washers
Front