LevelOne VOI-8001 - Manual (Page 67)

67
4.2.5.5 Flash & Call waiting
/VoIP Setup/Advance Setup/Flash & Call waiting
On this page, user can define the parameters relative to the FLASH key and Call
Waiting function. These functions usually work with PBX
 Token for flash key on VoIP(!):
Define the token for flash key during VoIP protocol ( use “! “ by default).
 Flash Signal generate length :
Define the pause time (ms) for one “,” symbol at /Routing Setting/VoIP
Call Out/ . This pause till is useful for PBX seize the trunk line from
extension line. The default time is 1000ms, Input range from 100 to
3000ms.
 Flash Signal Detect Threshold:
Define the threshold for valid FLASH signal. Only the flash time length
between setting between min. to max. is accept by the gateway.
 VoIP User Agent:
You can fill in the value to this packet, usually it used for the communicating
recognization.
 VoIP Transfer:
Select the proper transfer method for VoIP in this item, unattended or
attended.