LevelOne VOI-8001 - Manual (Page 47)

4
4.2.2.9 VoIP Routing Profile Setting
/VoIP Setup/Routing Setup/Routing Profile/
This page defines the optional special VoIP parameters when making/received a
VoIP call. For define some special parameters for different VoIP equipment or
authorize purpose, please add a profile at /VoIP Setup/Routing Setup/
Routing Profile/ and use the same name as the profile on the Call in Routing
Table ( /VoIP Setup/Routing Setup/VoIP Call In/ ) or Call out Routing table
( /VoIP Setup/Routing Setup/VoIP Call Out/ ).
a. Name: Specify a profile name. Please use UNDERLINE to replace the
SPACE due to HTTP protocol limitation.
b. VAD:
 ON: turn on the VAD(Voice Active Detection) function.
 OFF: turn off the VAD function, please select ON for save the bandwidth.
c. CODEC: Select different voice CODEC for VoIP communication. The bit rate
of G.723.1 is 5.3k/6.3k, G.729 is 8k, uLaw and aLaw is 64k per second. The
G.723.1 is default CODEC.
d. H.245 tunneling:
 ON for enable H.245 tunneling.
 OFF for disable H.245 tunneling.
e. DTMF Relay: