LEESON FHP Series NEMA 4x Variable Speed Drive - Manual (Page 29)

20
Voltage or Current Follower
Drives can be configured to follow an isolated or a
grounded (non-isolated) voltage or current signal. To
configure the drive to follow a voltage or current signal,
connect the signal leads to the S1 and S2 terminals on
TB501 as shown in Figure 11 above. Ensure that the
following jumper terminals are properly set as shown in
Figure 12 (page 21).
D S3 S2 S1 E1 E2
Figure 11. Signal and Optional Switch Connections
for 175326.00
DIRECTION
SWITCH ENABLE/DISABLE
SWITCH
(open to disable)